PhosphoClear Precipitation Formula is a specialized treatment solution designed to effectively reduce phosphorus levels in municipal wastewater. Utilizing a calcium-based compound, this formula prevents eutrophication by transforming phosphates into insoluble particles, which are easily removed. Ideal for environmental protection, it ensures cleaner water systems and safeguards aquatic life.
Technical Specifications
pH Level: 11.0-11.5
Shelf Life: 2 years in unopened containers
Batch Size: 1000 kg
Processing Time: Total processing time of 2 hours including all phases
Temperature: Maintain 20-25°C during processing for optimal results
Storage: Store in a cool, dry place at temperatures between 10-25°C, avoid humidity above 70%
Viscosity: Low viscosity suitable for easy mixing
Certification: Complies with ISO 9001 and ISO 14001 standards
Ingredients
Ingredient
Percentage
Function
Calcium Hydroxide
85.0%
Acts as the primary agent for phosphate precipitation, transforming soluble phosphates into insoluble calcium phosphate.
Polyacrylamide
10.0%
Serves as a flocculant to agglomerate precipitated particles and improve sedimentation efficiency.
Anti-Foam Agent
5.0%
Prevents foaming during the treatment process to maintain optimal operational conditions.
Manufacturing Process
Preparation Phase
Mix Calcium Hydroxide with deionized water at a concentration of 1:10 to form a homogenous slurry.
Ensure the solution is at a temperature of 25°C before proceeding to the next phase.
Reaction Phase
Add the slurry gradually to the wastewater with constant stirring using a mechanical agitator operating at 150 rpm.
Maintain a reaction temperature between 20-25°C for optimal precipitation.
Monitor the pH continuously and adjust to maintain within 11.0-11.5 using an automatic pH controller.
Flocculation Phase
Introduce Polyacrylamide to the treated water at a controlled rate of 0.1% v/v to enhance floc formation.
Allow the mixture to settle for 30 minutes. Conduct settling tests to ensure floc integrity.
Use standard jar test equipment to control floc size and density, ensuring compliance with sedimentation standards.
Final Processing
Incorporate Anti-Foam Agent in the final stage to eliminate operational foam.
Perform a quality check for phosphorus levels to ensure they have been reduced below 0.1 mg/L.
Usage Instructions
Dilute the formula with clean water to achieve a 1% dispersion rate and add this diluted solution to the wastewater at a ratio of 1:100. Monitor the phosphorus levels to ensure they meet environmental standards.